Use sar to Monitor Resources in Linux
This article presents 10 ways that you can use the
System Activity Report (sar) command to monitor resources in Linux®.
1. Display the collective usage of all CPUs
Run the following command to display a summary of CPU usage:
sar -u
This command outputs the cumulative, real-time resource use of all CPUs.
You can add more parameters to this command. For example, adding 1 3 at
the end of the command as shown in the following example reports for every
1 second a total of 3 times:
sar -u 1 3
The output is similar to the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:27:32 PM CPU %user %nice %system %iowait %steal %idle
01:27:33 PM all 0.00 0.00 0.00 0.00 0.00 100.00
01:27:34 PM all 0.25 0.00 0.25 0.00 0.00 99.50
01:27:35 PM all 0.75 0.00 0.25 0.00 0.00 99.00
Average: all 0.33 0.00 0.17 0.00 0.00 99.50
The last field, %idle, indicates the CPU load.
The command has the following variations:
sar -u: Displays CPU usage for the current day.sar -u 1 3: Displays real-time CPU usage every 1 second for 3 times.sar -u ALL: Same as thesar -ucommand, but displays additional fields.sar -u ALL 1 3: Same as thesar -u 1 3command, but displays additional
fields.sar -u -f /var/log/sa/sa10: Displays CPU usage for the tenth day of the
month from thesa10file.
2. Display CPU usage by CPU or core
Run the following command to display CPU usage by CPU or core:
sar -P ALL 1 1
The -P ALL flag indicates that you want to display statistics for
all of the individual cores.
In the CPU column of the following example output, 0, 1, 2, and 3
are CPU core numbers:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:34:12 PM CPU %user %nice %system %iowait %steal %idle
01:34:13 PM all 11.69 0.00 4.71 0.69 0.00 82.90
01:34:13 PM 0 35.00 0.00 6.00 0.00 0.00 59.00
01:34:13 PM 1 22.00 0.00 5.00 0.00 0.00 73.00
01:34:13 PM 2 3.00 0.00 1.00 0.00 0.00 96.00
01:34:13 PM 3 0.00 0.00 0.00 0.00 0.00 100.00
If you want to display statistics for only the second core,
use the -P 1 flag (because core numbers start from 0),
as shown in the following example:
sar -P 1 1 1
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:36:25 PM CPU %user %nice %system %iowait %steal %idle
01:36:26 PM 1 8.08 0.00 2.02 1.01 0.00 88.89
You might also find the following variations helpful:
sar -P ALL: Displays CPU usage for each core for the current day.sar -P ALL 1 3: Displays real-time CPU usage of each core
every 1 second for 3 times.sar -P 1: Displays CPU usage for core number 1 for the current day.sar -P 1 1 3: Displays real-time CPU usage for core number 1,
every 1 second for 3 times.sar -P ALL -f /var/log/sa/sa10: Displays CPU usage for each
core for the tenth day of the month from thesa10file.
3. Display free and used memory
Run the following command to display free and used memory:
sar -r
If you add 1 3 to the command as shown in the following example,
the output reports for every 1 second a total of 3 times:
sar -r 1 3
The output looks like the following example, in which
kbmemfree is free memory and kbmemused is used memory:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
07:28:06 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit kbactive kbinact
07:28:07 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
07:28:08 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
07:28:09 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
Average: 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
This command has the following variations:
sar -rsar -r 1 3sar -r -f /var/log/sa/sa10
4. Display swap space use
Run the following command to display the amount of swap space that is in use:
sar -S
If you add 1 3 to the end of the command as shown in the following example,
the output reports for every 1 second a total of 3 times:
sar -S 1 3
The output is similar to the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
07:31:06 AM kbswpfree kbswpused %swpused kbswpcad %swpcad
07:31:07 AM 8385920 0 0.00 0 0.00
07:31:08 AM 8385920 0 0.00 0 0.00
07:31:09 AM 8385920 0 0.00 0 0.00
Average: 8385920 0 0.00 0 0.00
Note: If the kbswpused and %swpused are at 0, then your system
is not swapping.
This command has the following variations:
sar -Ssar -S 1 3sar -S -f /var/log/sa/sa10
Additional swap space commands
You might also find the following swap space commands helpful:
- Use
sar -Rto identify the number of memory pages that the system has
freed, used, and cached. - Use
sar -Hto identify the Linux® HugePages (in kilobytes (KB)) that
are in use and available. - Use
sar -Bto generate paging statistics such as the number of KB paged in
(and out) from disk per second. - Use
sar -Wto generate page swap statistics, such as page swap in (and out)
per second.
5. Display I/O activities
Run the following command to display overall input and output (I/O) activities:
sar -b
The output from this command displays I/O statistics. If you add 1 3 to the
end of the command as shown in the following example, the output reports for every 1 second a total of 3 times:
sar -b 1 3
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:56:28 PM tps rtps wtps bread/s bwrtn/s
01:56:29 PM 346.00 264.00 82.00 2208.00 768.00
01:56:30 PM 100.00 36.00 64.00 304.00 816.00
01:56:31 PM 282.83 32.32 250.51 258.59 2537.37
Average: 242.81 111.04 131.77 925.75 1369.90
The output includes the following fields:
tps: Transactions per second (both read and write)rtps: Read transactions per secondwtps: Write transactions per secondbread/s: Bytes read per secondbwrtn/s: Bytes written per second
This command has the following variations:
sar -bsar -b 1 3sar -b -f /var/log/sa/sa10
Note: Use sar -v to display the number of inode handlers, file handlers,
and pseudo-terminals that the system is using.
6. Display the I/O activities of individual block devices
Run the following command to display the I/O activities of individual block
devices:
sar -d
To identify activities by individual block device (such as a specific
mount point, logical unit number (LUN), or partition), use sar -d, as shown
in the following example:
sar -d 1 1
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:59:45 PM DEV tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util
01:59:46 PM dev8-0 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10
01:59:46 PM dev8-1 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10
01:59:46 PM dev120-64 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62
01:59:46 PM dev120-65 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62
01:59:46 PM dev120-0 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30
01:59:46 PM dev120-1 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30
01:59:46 PM dev120-96 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91
01:59:46 PM dev120-97 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91
In this example, the values in the DEV column represent specific block
devices. For example, dev53-1 means a block device with 53 as major number,
and 1 as minor number.
You can use the pretty print (-p) flag as shown in the following example to
make the column display the actual device name (such as sda, sda1, or sdb1):
sar -p -d 1 1
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:59:45 PM DEV tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util
01:59:46 PM sda 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10
01:59:46 PM sda1 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10
01:59:46 PM sdb1 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62
01:59:46 PM sdc1 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62
01:59:46 PM sde1 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30
01:59:46 PM sdf1 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30
01:59:46 PM sda2 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91
01:59:46 PM sdb2 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91
This command has the following variations:
sar -dsar -d 1 3sar -d -f /var/log/sa/sa10sar -p -d
7. Display the context switch per second
Run the following command to display the context switch per second:
sar -w
This command reports the total number of processes created per second and the
total number of context switches per second. If you add 1 3 to the end of
the command as shown in the following example, it reports for every 1 second
a total of 3 times:
sar -w 1 3
The output is similar to the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
08:32:24 AM proc/s cswch/s
08:32:25 AM 3.00 53.00
08:32:26 AM 4.00 61.39
08:32:27 AM 2.00 57.00
This command has the following variations:
sar -wsar -w 1 3sar -w -f /var/log/sa/sa10
8. Display the run queue and load average
Run the following command to display the run queue and load average:
sar -q
This command reports the run queue size and load average for the past minute,
past 5 minutes, and past 15 minutes. If you add 1 3 to the end of the
command as shown in the following example, it reports for every 1 second a
total of 3 times:
sar -q 1 3
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
06:28:53 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked
06:28:54 AM 0 230 2.00 3.00 5.00 0
06:28:55 AM 2 210 2.01 3.15 5.15 0
06:28:56 AM 2 230 2.12 3.12 5.12 0
Average: 3 230 3.12 3.12 5.12 0
Note: The blocked column displays the number of tasks that are currently
blocked and waiting for I/O operations to complete.
This command has the following variations:
sar -qsar -q 1 3sar -q -f /var/log/sa/sa10
9. Display network statistics
Run the following command to display network statistics:
sar -n
This command reports various network statistics, such as the number of packets
received (transmitted) through the network card or the number of packet
failures that occurred. If you add 1 3 to the end of the command, it reports
for every 1 second a total of 3 times.
You can also add a keyword to the command, as shown in the following example:
sar -n KEYWORD
KEYWORD can be one of the following options:
DEV: Displays vital statistics for network devicesEDEV: Display failure statistics for network devicesNFS: Displays Network File System (NFS) client activitiesNFSD: Displays NFS server activitiesSOCK: Displays the sockets that are in use for IPv4IP: Displays IPv4 network trafficEIP: Displays IPv4 network errorsICMP: Displays ICMPv4 network trafficEICMP: Displays ICMPv4 network errorsTCP: Displays TCPv4 network trafficETCP: Displays TCPv4 network errorsUDP: Displays UDPv4 network trafficSOCK6,IP6,EIP6,ICMP6, andUDP6: Displays IPv6
network informationALL: Displays all of the preceding information
The following example uses the DEV keyword:
sar -n DEV 1 1
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
01:11:13 PM IFACE rxpck/s txpck/s rxbyt/s txbyt/s rxcmp/s txcmp/s rxmcst/s
01:11:14 PM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00
01:11:14 PM eth0 342.57 342.57 93923.76 141773.27 0.00 0.00 0.00
01:11:14 PM eth1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10. Report sar data by start time
Run the following command to report sar data by start time:
sar -s
When you view historical sar data from the /var/log/sa/saXX file by using
the sar -f option, the output displays all of the sar data for that specific
day beginning at 12:00 a.m.
You can use the -s hh:mi:ss option to specify the start time. For example,
if you specify sar -s 10:00:00, the output from the command displays the sar
data beginning at 10 a.m. (instead of the default of midnight).
You can combine the -s flag with other sar flags. For example, to report the
load average on the 26th of the current month starting from 10 a.m., combine
the -q and -s flags as shown in the following example:
sar -q -f /var/log/sa/sa23 -s 10:00:01
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
10:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked
10:10:01 AM 0 127 2.00 3.00 5.00 0
10:20:01 AM 0 127 2.00 3.00 5.00 0
...
11:20:01 AM 0 127 5.00 3.00 3.00 0
12:00:01 PM 0 127 4.00 2.00 1.00 0
You cannot specify an end time. Instead, you need to use the head
command. For example, if you want to start from 10 a.m. and see 7 entries, you
pipe the preceding output to head -n 10, as shown in the following example:
sar -q -f /var/log/sa/sa23 -s 10:00:01 | head -n 10
The output looks like the following example:
Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)
10:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked
10:10:01 AM 0 127 2.00 3.00 5.00 0
10:20:01 AM 0 127 2.00 3.00 5.00 0
10:30:01 AM 0 127 3.00 5.00 2.00 0
10:40:01 AM 0 127 4.00 2.00 1.00 2
10:50:01 AM 0 127 3.00 5.00 5.00 0
11:00:01 AM 0 127 2.00 1.00 6.00 0
11:10:01 AM 0 127 1.00 3.00 7.00 2
Updated 12 months ago