Cloud Backup - Basic troubleshooting on Windows Server 2012, 2016, and 2019

This article provides basic troubleshooting steps for Cloud Backup on Windows
Server® 2012, 2016, and 2019 if you are experiencing the following issues:

  • Backups are not running.
  • Backups take too long to complete.
  • Cloud Backup uses all of the server’s resources.

As a Managed Infrastructure customer who administers your own servers, this
article helps you diagnose if the server is experiencing an issue that you can
remedy or escalate to a member of Rackspace Support.
This article provides instructions and helpful information that you can
include when you create a ticket.

Check for open issues

Before you restart the DriveClient service, check
status.rackspace.com to ensure there are no
Cloud Backup open issues that could be impacting your server instance. In
addition, check the current support tickets to ensure that no
incident is causing the lack of server access.

Use the following steps to check your open support tickets:

  1. Log in to the Cloud Control Panel.
  2. In the top navigation bar, click Select a Product > Rackspace Cloud.
  3. Select Tickets > Ticket List.

If there are no open support tickets about the server in question, try to
establish a connection, as shown in the next section.

Establish connection

Use the following steps to establish a connection:

  1. Log in to the Cloud Control Panel.

  2. In the top navigation bar, click Select a Product > Rackspace Cloud.

  3. Select Backups > Systems.

  4. From the list of Cloud Backup Systems, click the backup server name.
    This action displays the following details about the backup system:

    • The Internet Protocol (IP) address of the server
    • The system type
    • The backup vault size
    • If encryption is enabled
    • The server region
    • The backup region
    • If service net is enabled
    • The agent version
  5. To the right of the system name, review the status of the backup agent. The
    backup status is connected or disconnected.

  6. Wait ten seconds to ensure that the status is accurate because it can change
    quickly.

  7. After 10 seconds, perform one of the following actions:

    • If the status is connected, contact Rackspace Support.
    • If the status is disconnected, restart the DriveClient service, as
      shown in the next section.

Restart the DriveClient service

  1. Log in to the server through RDP and click the Windows® symbol in the
    bottom-left corner.

  2. Click the Search icon in the top-right corner.

  3. Enter services.msc in the search field.

  4. Locate the DriveClient service, right-click it, and select Restart. A
    pop-up window shows the status of the restart.

  5. After the restart completes, find the DriveClient service again in the
    Services (Local) list, and ensure that its status is Running.

  6. Ensure that you have the DriveClient configured to start at bootup:

    a. Right-click the DriveClient service and click Properties.
    b. Click the drop-down list next to Startup type and select Automatic.
    c. Click OK at the bottom of the page.
    d. After the service restarts, check the Cloud Control Panel to ensure the
    service is running.

  7. Perform one of the following:

    • If the agent is connected, contact Rackspace Technical Support.
    • If the agent is not connected, attach the backup log to a technical support
      ticket. The backup log is located at
      C:\ProgramData\Driveclient\log\driveclient.log. Rackspace Support uses
      the log file to expedite a response to the issue.