Brocade Vyatta vRouter FAQ

{{}}

Since the Brocade Vyatta vRouter is a network appliance deployed on a
Cloud Server, the network throughput is dictated by the size of the
Cloud Server. Refer to Cloud Servers Pricing for the network throughput for different flavors of Cloud Servers.
{{}}
{{}}
The minimum RAM size needed to run a vRouter is 1 GB.
{{}}
{{}}

Each Vyatta appliance comes with one public IPv4 address assigned. Up to
four additional public IPv4 addresses can be allocated (for a total of
5) . Please see this article for more details: Requesting Additional IPv4 Addresses for Cloud Servers
{{}}
{{}}

No. RackConnect users may not use the vRouter at this time.
{{}}
{{}}

Yes. The vRouter is available for the Managed Operations service level.
{{}}
{{}}

The Vyatta appliance supports VRRP for High-availability. However,
Rackspace cannot support High Availability of Vyatta over the Public Net
interface because "Shared IP address" is not available over PublicNet at
this time. You can, however, setup Vyatta to be Highly Available on the
Cloud Networks interface since Shared IP addresses are supported on
Cloud Networks.
{{}}
{{}}

No. Do not add/disconnect networks . This will cause serious issues with
networking on the Vyatta and the only recourse will be to rebuild the
Vyatta.
{{}}
{{}}

Please log in with username 'vyatta' to login to the appliance.
{{}}
{{}}

Control panel actions and limitations are described at the following
link: Vyatta Network Appliance: Supported Actions Through Cloud Control Panel
{{}}